ai.sparkquote/nec-calculators
name:ai.sparkquote/nec-calculators
NEC 2023 electrical calculators: wire size, ampacity, voltage drop, conduit fill, box fill, load.
- transport:
- remote
- credential class:
- self-provisionable
Owner verification
Not yet verified. Verifying proves you control this server and is free, permanently — it never changes a published score.
Start verification →Tools
- bid_calculatorshallow
Electrical bid price from materials, markup, labor hours and rate, job costs, overhead and a target net margin (price = break-even / (1 − margin)).
- box_fillshallow
Minimum outlet box volume from NEC 314.16(B): conductor, device (2 each), clamp and grounding allowances times the Table 314.16(B) volume for the largest conductor.
- conduit_fillshallow
Percent fill and maximum number of THHN/THWN-2 conductors of one size in EMT or PVC Schedule 40, from NEC Chapter 9 Tables 1, 4 and 5.
- load_calculatorshallow
Dwelling service load by the NEC 220.82 optional method: 3 VA/ft² lighting, small-appliance and laundry circuits, fixed appliances, demand factor, heating or cooling, and the minimum standard service size. Leave an appliance out to count it as 0 VA.
- nec_ampacityshallow
Allowable ampacity of one insulated conductor from NEC Table 310.16 (not more than three current-carrying conductors in a raceway or cable, 30°C ambient), before any adjustment or correction factors and before the 240.4(D) small-conductor limits.
- ohms_lawshallow
Ohm's law and power: give exactly two of voltage, current, resistance and power; the other two are calculated.
- panel_scheduleshallow
Lays circuits out on a 120/240 V single-phase or 208Y/120 V three-phase panel and totals the load per phase with the imbalance.
- voltage_dropshallow
Voltage drop for a given conductor size, current and one-way length, single- or three-phase, from NEC Chapter 9 Table 8 circular mils (VD = 2·K·I·L / CM, or √3 for three-phase).
- watts_to_ampsshallow
Current drawn by a load in watts at a voltage and power factor, single- or three-phase, plus the 125% continuous-load value.
- wire_sizeshallow
Minimum conductor size for a circuit: NEC Table 310.16 ampacity at the termination temperature rating, the 240.4(D) small-conductor limits, voltage drop over the run, and the Table 250.122 equipment grounding conductor, increased in proportion under 250.122(B) when voltage drop upsizes the conductors.
Embed this server’s score
Tool count and median score across every tool in this server’s corpus — honest in a way a single cherry-picked tool’s badge wouldn’t be.
[](https://vouch.tools/servers/6acf6f8d-016b-43b9-833f-83d4d88e451b)